A Practical Guide to Modeling High-Altitude EMP in Ansys EMC Plus

High-altitude electromagnetic pulse (HEMP) effects, caused by nuclear detonations, create fast, intense electromagnetic fields that can induce disruptive transients or damage sensitive electronics. For aerospace, defense, and critical-infrastructure systems, understanding how these fields interact with complex platforms is essential. Since full-scale testing is impractical, engineers rely on simulation tools capable of capturing both external fields and internal electromagnetic behavior.

Electro Magnetic Applications Inc. (EMA) uses Ansys EMC Plus for this purpose. EMC Plus supports full-platform modeling, multi-angle field excitation, and detailed internal field characterization, making it effective for HEMP analysis.

This practical guide to modeling HEMP in EMC Plus includes:

  • Understanding the HEMP environment
  • Simulation approaches and tools
  • Modeling key entry points
  • Mesh and geometry considerations
  • Probes and post-processing

Understanding the HEMP Environment

HEMP consists of three components (Table 1), but platform-level modeling typically focuses on the E1 pulse, an extremely fast, high-amplitude waveform created by gamma-ray interactions in the upper atmosphere. This pulse propagates as a large-scale plane wave and can couple into aircraft, vehicles, ships, and infrastructure through a variety of pathways, including:

  • Apertures such as windows, access panels, holes
  • Seams, fasteners, panel joints, and imperfect bonds
  • Wiring harnesses and cabling paths

These coupling paths determine how energy enters and moves within a platform, forming the basis for how the simulation model should be constructed.

Comparison of HEMP components

Table 1. Comparison of HEMP components

EMC Plus for HEMP Modeling

Platform-scale HEMP analysis is computationally demanding due to the large geometries and high frequencies involved. EMC Plus provides several capabilities that align with these needs:

  • Efficient plane-wave excitation tools for applying HEMP waveforms
  • Meshing support for hundreds of millions of cells
  • Cable/harness modeling with shields, overbraids, terminations
  • Parallelized simulation runs for sweeping incident angles
  • Flexible material, seam, and impedance parameterization

In many cases, existing meshes developed for lightning, electromagnetic compatibility (EMC), or structural meshes can be adapted, making the modeling processes more efficient.

EMC Plus can simulate HEMP to meet MIL-STD-3023, MIL-STD-4023, MIL-STD-188-125-1, and MIL-STD-461.

Building the Model

Mesh Quality and Geometry Fidelity

Geometry fidelity directly affects the accuracy of HEMP simulations. While not every feature must be represented, several elements are critical:

  • A watertight outer mold line, unexpected gaps behave like unintended apertures
  • Internal cavities, which can create resonances
  • Realistic cable routing, as conductive loops are strong coupling points

Typical HEMP models use cell sizes around 30 mm, yielding frequencies up to about 1 GHz. For large aircraft, models may exceed 800 million cells. Figure 2 is an example mesh in EMC Plus.

Mesh for aerospace HEMP simulation.

Fig. 2. Mesh for aerospace HEMP simulation.

Points of Entry

The dominant electromagnetic response is shaped by how the incident fields enter the platform. Key entry mechanisms include:

  • Physical apertures such as windows or holes
  • Seams and joints with imperfect electrical bonding
  • Cable penetrations that carry energy deep inside
  • Conducted bonding faults or poor structural continuity

EMC Plus enables users to assign electrical properties to these features without building fine-grained mechanical details, keeping the model both accurate and computationally reasonable.

Applying HEMP Fields Using the Plane-Wave Tool

HEMP can arrive from any direction, so a single simulation angle is not enough. Users typically run multiple azimuth and elevation combinations with both horizontal and vertical polarizations. A representative baseline might involve 17 angles multiplied by two polarizations for a total of 34 simulations, shown in Figure 3.

EMC Plus parallelizes these runs, enabling full simulation to run efficiently while reducing total turnaround time.

Multi-angle HEMP excitation pattern showing the set of azimuth-elevation combinations used to illuminate the aircraft model during simulation.

Fig. 3. Multi-angle HEMP excitation pattern showing the set of azimuth-elevation combinations used to illuminate the aircraft model during simulation.

Probing and Measuring Electromagnetic Response

Three probe types help extract meaningful results, each offering a different perspective on how electromagnetic fields interact with the platform:

Electric Field Probes (E)

Electric field probes measure the 3-axis electric field in a defined volume. They are essential for:

  • Determining internal cavity field strength
  • Converting to the frequency domain for averaging and statistics
  • Identifying resonances (common around 35 MHz, 50 MHz, 200+ MHz, depending on fuselage geometry)

Bundle Current Probes (J)

Bundle current probes compute current flowing through cable harnesses using Ampere’s law. They are highly effective for:

  • Revealing worst-case induced transients
  • Understanding how bonding quality affects system survivability

Animation Probes (A)

Animation probes provide qualitative visualizations of:

  • Field probes
  • Wavefront movement
  • Hotspot locations

Together, all three probe types create a comprehensive picture of how electromagnetic energy enters and propagates through a complex system. Figure 4 shows where probes are placed in a simulation model.

Probe layout within the simulation model, showing the positions of electric-field probes (E), bundle current probes (J), and animation probes (A).

Fig. 4. Probe layout within the simulation model, showing the positions of electric-field probes (E), bundle current probes (J), and animation probes (A).

Material Modeling, Conductivity, and Aperture Treatments

Material properties strongly influence field penetration. Windows, coatings, seams, and joints can drastically alter internal energy levels. Instead of modeling every layer or mechanical feature, EMC Plus allows simplified but effective representations:

  • Apertures modeled by removing surfaces, creating direct entry points
  • Conductive coatings or simplified material parameters for windows and composites
  • Seam impedance values representing bonding quality, ranging from well-bonded to degraded

This approach captures the dominant physics while maintaining practical simulation sizes.

Scaling, Frequency Conversion, and Post-Processing

HEMP is modeled in the time domain, meaning extracting engineering insight requires converting results into the frequency domain. Outputs must be normalized to ensure consistent amplitudes regardless of timestep or simulation length. Typical post-processing includes:

  • Averaging field samples to capture representative behavior
  • Extracting peak envelopes across all angles and frequencies
  • Comparing bonded vs. unbonded configurations to assess sensitivity
  • Evaluating cable hardening strategies by reviewing current reductions

Together, these steps turn raw time-domain waveforms into actionable insight, highlighting vulnerabilities, quantifying coupling paths, and guiding design improvements for HEMP resilience.

Figure 5 compares several simulation conditions, illustrating the effects of including or removing a window aperture, adding or omitting a window surface coating, and modeling the same seam with both high and low impedance values.

A Practical Workflow

A streamlined HEMP modeling process might look like:

  1. Start with a watertight platform mesh
  2. Add cavity definitions
  3. Define aperture, seam, and window parameters
  4. Route cables with realistic shielding and terminations
  5. Apply multi-angle plane wave excitations
  6. Use electric-field, current, and animation probes together
  7. Post-process to extract the composite maximum and trends
  8. Iterate on geometry and bonding to enhance resilience

Strengthening Resilience Through Simulation

HEMP modeling helps identify energy paths, quantify vulnerabilities, and validate hardening strategies. With accurate geometry, thoughtful material and seam modeling, efficient meshing, and multi-directional field excitation, EMC Plus provides a powerful environment for understanding and mitigating HEMP risks.

As threats evolve, fast and scalable HEMP simulation has become essential for designing robust aerospace, defense, and infrastructure systems.

Learn more about HEMP modeling in EMC Plus by watching the EMA Expo 2026 session “Characterizing Platform-Level Response to the High-Altitude Electromagnetic Pulse Environment.” Watch on demand here.

If you’re ready to strengthen your program’s HEMP resilience, now is the time to explore what EMA and EMC Plus can do for you. Contact EMA to discuss your modeling challenges, request a demo, or schedule a consultation.

Newsletter